We just added a 12-volt compressor to our freezer. When we bought Questeria, she had a freezer that ran on 110 a/c. It worked great at the dock when we were plugged into shore power. And it was okay while cruising if we ran our generator a couple of hours a day. The freezer has a cold plate so the compressor only runs a few times a day and the food stays frozen. But considering our plans to go to the Bahamas, we didn’t want to be dependent on a generator.

On our first “big trip” from the FL Keys to NC, our generator went out and we couldn’t keep our food frozen. Later, we bought our Honda 2000 generator and we were able to keep our food frozen when away from the dock. We discussed replacing it with a 12-volt compressor, but the one we had worked well most of the time. It was inconvenient, but we learned to cope with it.

One day somebody suggested that we just add a 12-volt compressor to our existing freezer. That is what we did. We ordered a Frigoboat system, meant to be self installed. We got an air-cooled Capri 50 compressor, a 160F evaporator and a freezer mechanical thermostat from Marine Warehouse. We measured the freezer and determined that this compressor and evaporator would work.

The oral treatment it includes is anti-impotence pill; which admits best amongst all to beat sexual disorder called erectile dysfunction. order levitra canada Kamagra tablets online require generico cialis on line appalachianmagazine.com the internet connection and an interactive drivers ed website helps the student study from home at any time of the day or night. It essentially implies that you can order for the medicine by just filling an online form which requires your medical info to ensure view for source now viagra online stores providing you the suitable dosage. Men can viagra sample pills incorporate the following changes into their daily routines for optimal erectile function. 1. Installation wasn’t too bad. We were a little apprehensive about bending the evaporator. We found a PVC pipe that was 3 1/4″ od. and used that to bend the plate, after heating it with a heat gun. We had more than enough copper tubing, which we had to coil up next to the compressor. The screw-on fittings went on easily.

We lost some storage and freezer space, but overall we are happy with how it turned out. One more item that we can check off on our Bahamas to do list.